topic IME data not displaying in Network Security https://community.cisco.com/t5/network-security/ime-data-not-displaying/m-p/2105686#M54289 <HTML><HEAD></HEAD><BODY><P> You can go into the SSM on the command line, to verify that events are being recorded. Make sure these events are set to generate an alarm, otherwise they won't be displayed in IME.</P></BODY></HTML> Fri, 14 Dec 2012 20:52:16 GMT mark.barrett 2012-12-14T20:52:16Z IME data not displaying https://community.cisco.com/t5/network-security/ime-data-not-displaying/m-p/2105685#M54287 <P>I am running the SSM-10 off of an ASA 5510. While using the IME application, no data shows up under any gadget and I get the meeesage "No Data available to display" at each gadget. The gadgets that are showing this are Top signatures, Top attackers, and top victims. The network security gadget shows events so it appears that events are hitting the IPS but are not showing up in the previously mentioned gadgets. I am using version 7.2.3 of IME. Any help would be appreciated.</P><P></P><P>TJ</P> Sun, 10 Mar 2019 12:51:01 GMT https://community.cisco.com/t5/network-security/ime-data-not-displaying/m-p/2105685#M54287 thomas.green 2019-03-10T12:51:01Z IME data not displaying https://community.cisco.com/t5/network-security/ime-data-not-displaying/m-p/2105686#M54289 <HTML><HEAD></HEAD><BODY><P> You can go into the SSM on the command line, to verify that events are being recorded. Make sure these events are set to generate an alarm, otherwise they won't be displayed in IME.</P></BODY></HTML> Fri, 14 Dec 2012 20:52:16 GMT https://community.cisco.com/t5/network-security/ime-data-not-displaying/m-p/2105686#M54289 mark.barrett 2012-12-14T20:52:16Z