topic FLASR1-FPI-RTU and FLASR1-FW-RTU in Network Security

FLASR1-FPI-RTU and FLASR1-FW-RTU

splendor_systems — Sun, 10 Mar 2019 12:46:02 GMT

I just got into a position where a ASR1000 is used with Right-To-Use licenses for FLASR1-FPI-RTU and FLASR1-FW-RTU. Now I need to know where can I know the feature set of these components and can I use them for IDS or IPS ? Any extensive documentation links ?

Regards

FLASR1-FPI-RTU and FLASR1-FW-RTU

Jennifer Halim — Wed, 05 Sep 2012 05:49:57 GMT

IPS is not supported on ASR1000 unfortunately.

FLASR1-FPI-RTU is for FPM and NBAR, and FLASR1-FW-RTU is for Firewall feature.

Here is the list of all the supported feature and license part# on ASR:

http://www.cisco.com/en/US/partner/prod/collateral/routers/ps9343/product_bulletin_c07-448862.html

Hope that helps.

FLASR1-FPI-RTU and FLASR1-FW-RTU

splendor_systems — Wed, 05 Sep 2012 07:56:38 GMT

FPM and NBAR do look like what I need, is there some sort of GUI interface that can be purchased for ASR that covers these features ?

Regards

FLASR1-FPI-RTU and FLASR1-FW-RTU

Jennifer Halim — Thu, 06 Sep 2012 03:23:15 GMT

Don't believe there is any GUI interface to configure FPM and NBAR.

Here is the configuration guide to configure:

NBAR:

http://www.cisco.com/en/US/docs/ios-xml/ios/qos_nbar/configuration/xe-3s/qos-nbar-xe-3s-book.html

http://www.cisco.com/en/US/docs/ios/ios_xe/qos/configuration/guide/nbar_protocol_pack_xe.html

FPM:

http://www.cisco.com/en/US/docs/ios-xml/ios/sec_data_fpm/configuration/xe-3s/sec-flex-pack-match.html

Hope that helps.

FLASR1-FPI-RTU and FLASR1-FW-RTU

justin.franks — Mon, 20 May 2013 23:48:49 GMT

We recently invested in 4x ASR1004s with the following features:

FLASR1-FW-RTU

FLASR1-FPI-RTU

How do I enable them? How do I know they are enabled? What is the process to get them enabled?

same problem

zhaoheu330 — Wed, 24 Sep 2014 18:41:33 GMT

same problem

It was explained to me that

justin.franks — Wed, 24 Sep 2014 18:58:15 GMT

It was explained to me that the ASR100x's we purchased already had all the features enabled. If you use the features without purchasing a license then you are in violation of use. Indeed, all I had to do was find the right commands. Of course, it depends on the IOS version you are using.

thank you justin

zhaoheu330 — Thu, 25 Sep 2014 14:08:21 GMT

thank you justin