topic PDM not accessible after PIX 701 upgrade in Network Security

PDM not accessible after PIX 701 upgrade

martinfong — Fri, 21 Feb 2020 08:05:21 GMT

Hi,

We replace PIX 634 with PIX 701 and PDM version 302 with 303.

We are now unable to access the PDM via a browser (which worked under the previous versions).

This message is being returned

404 Not Found

The requested URL /admin/index.html was not found on this server.

Martin

Re: PDM not accessible after PIX 701 upgrade

martinfong — Mon, 18 Apr 2005 03:52:07 GMT

I forgot to mention the box is a PIX 515E

Re: PDM not accessible after PIX 701 upgrade

fedrodri — Mon, 18 Apr 2005 04:43:58 GMT

Hi, Martin

PDM does not work with 7.0.1. It was replaced with ASDM (Adaptive Security Device Manager). Go ahead and download it from CCO (asdm-501.bin); I think the 'copy tftp flash:asdm' command will work from the configuration mode. When you're done, make sure that you also enter the command 'asdm image flash:/asdm-501.bin' in order for the ASDM to load properly.

Hope that helps!

Federico Rodriguez

Re: PDM not accessible after PIX 701 upgrade

martinfong — Mon, 18 Apr 2005 05:51:26 GMT

Thanks for pointing that out.

I have been able to install asdm. But have trouble trying to execute the asdm command, this seems to be the only available option under the privileged rights.

adcisco# asdm ?

disconnect Specify ASDM session id to be disconnected after this keyword

This message is returned when trying to execute the command you suggested. It is the same instruction as in the asdm manual.

radcisco# asdm image flash:/asdm-501.bin

ERROR: % Invalid input detected at '^' marker.

Re: PDM not accessible after PIX 701 upgrade

mhussein — Mon, 18 Apr 2005 06:38:08 GMT

Hello,

That is a config mode command:

pix(config)# asdm image flash:/asdm.bin

HTH,

Mustafa