router behind pix

esy_conft — Fri, 21 Feb 2020 08:04:06 GMT

first----> thanx for your helps

second--->i have a network like this:

DMZ CAFE-NET

| |

LAN---ISA----as5350---pix---2600---DSL---INTERNET

REMOTE ACCESS

as5350 has tw0 interface

pix has two interface

2600 has one interface

i deploy the back-to back topology,and i wanna to assign (DMZ,CAFE-NET,REMOTE ACCESS) the

different ip ranges as(172.16.0.0/16,192.168.1.0/24,10.0.0.0/8)and my isa is in DMZ.

i use nat for remote access with the help of secondary ip.

but i want to now if i can use STATIC command in pix to accept incoming request for

DMZ SERVERS.i heard that inside part of pix command must be it's interface ip.

can i route this static to as5350 and then dmz?how?

another question:

can i use secondary ip in as5350 to do this:

peer default ip address pool sh10

ip local pool sh10 10.0.0.20 10.0.0.80

badly,i test it it does not work: i mean router can not route between secondary and primary ip

thanx for your help...

Re: router behind pix

umedryk — Fri, 15 Apr 2005 18:36:48 GMT

yes, inside part of pix command must be it's interface ip.