PIX 515 route

afshint — Fri, 21 Feb 2020 07:59:52 GMT

PIX 515 6.3

on my inside interface:

192.168.1.1 is Cisco VPN hardware client

192.168.1.2 is inside interface address

trying to route 10.20.14.x address thru 192.168.1.1 and any other requests like internet access thru 192.168.1.2

commands used:

route inside 10.14.20.0 255.255.255.0 192.168.1.1 1

route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1

when I ping 10.20.14.x from console it pings,put it does not work from any workstations on my LAN.unless I change the default gatway to 192.168.1.1,then I loose my internet access.

please help.

Thanks

Re: PIX 515 route

sstudsdahl — Mon, 07 Mar 2005 22:45:03 GMT

It sounds like you are trying to get the PIX to redirect traffic to the hardware client. If this is the case, the PIX will not do it. You will need to use a router and have it issue redirects for traffic. Alternatively you could use a second interface within the PIX, be it physical or virtual.

Steve

topic PIX 515 route in Network Security

PIX 515 route

Re: PIX 515 route