https://community.cisco.com/t5/network-security/pix-allowing-ssl-ftp/m-p/368332#M550978 <HTML><HEAD></HEAD><BODY><P>Hii</P><P></P><P>Make sure you have TCP port 989 and 990 open for FTPs. These are the standard ports. make sure you have the same setting on the Ipswitch application..</P><P></P><P>one thing.. are u having any access-list on the inside interface of the pix ?? if so, add these lines to it</P><P></P><P>access-list inside permit tcp x.x.x.x x.x.x.x any eq 989</P><P>access-list inside permit tcp x.x.x.x x.x.x.x any eq 990</P><P></P><P>do this and then try...</P><P></P><P>Raj</P></BODY></HTML> Thu, 03 Mar 2005 07:49:05 GMT sachinraja 2005-03-03T07:49:05Z https://community.cisco.com/t5/network-security/pix-allowing-ssl-ftp/m-p/368331#M550977 <P>We have a client that needs to have information transfered to them using SSL FTP, medical information. We are using a PIX running 6.3(4) OS. The standard FTP works ok, but when we enable the SSL settings on the Ipswitch FTP server, we can connect, but we can not transfer data.</P> Fri, 21 Feb 2020 07:59:08 GMT https://community.cisco.com/t5/network-security/pix-allowing-ssl-ftp/m-p/368331#M550977 ereinoehl 2020-02-21T07:59:08Z https://community.cisco.com/t5/network-security/pix-allowing-ssl-ftp/m-p/368332#M550978 <HTML><HEAD></HEAD><BODY><P>Hii</P><P></P><P>Make sure you have TCP port 989 and 990 open for FTPs. These are the standard ports. make sure you have the same setting on the Ipswitch application..</P><P></P><P>one thing.. are u having any access-list on the inside interface of the pix ?? if so, add these lines to it</P><P></P><P>access-list inside permit tcp x.x.x.x x.x.x.x any eq 989</P><P>access-list inside permit tcp x.x.x.x x.x.x.x any eq 990</P><P></P><P>do this and then try...</P><P></P><P>Raj</P></BODY></HTML> Thu, 03 Mar 2005 07:49:05 GMT https://community.cisco.com/t5/network-security/pix-allowing-ssl-ftp/m-p/368332#M550978 sachinraja 2005-03-03T07:49:05Z