Global Correlation failed to update

Andy White — Sun, 10 Mar 2019 12:42:03 GMT

Hello,

I've just installed our AIP-10 IPS module into a 5510, and the Global Correlation isn't updating.

I've open UDP/53 to an external DNS server and TCP/443 to 204.15.82.17

Updates:

Status Of Last Update Attempt = Failed

Time Since Last Successful Update = never

Counters:

Update Failures Since Last Success = 146

Total Update Attempts = 146

Total Update Failures = 146

Update Interval In Seconds = 300

Update Server = update-manifests.ironport.com

Update Server Address = 204.15.82.17

Current Versions:

config = 0

drop = 0

ip = 0

rule = 0

Warnings:

Ping works:

ping 204.15.82.17
PING 204.15.82.17 (204.15.82.17): 56 data bytes
64 bytes from 204.15.82.17: icmp_seq=0 ttl=48 time=162.6 ms
64 bytes from 204.15.82.17: icmp_seq=1 ttl=48 time=158.9 ms
64 bytes from 204.15.82.17: icmp_seq=2 ttl=48 time=156.2 ms
64 bytes from 204.15.82.17: icmp_seq=3 ttl=48 time=157.1 ms

--- 204.15.82.17 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 156.2/158.7/162.6 ms

What have I done wrong? We are working on a 60 day trial license key which we buy the annual license key, could it be this?

Thanks

Global Correlation failed to update

sawgupta — Sun, 10 Jun 2012 01:14:26 GMT

Do you see any event with detailed info ?

Run "show events" from the CLI and check for any Global Coorelation error. Alternatively, take a show-tech and see the main.log, if it has any detailed error with reason of failure.

Regards,

Sawan Gupta

topic Global Correlation failed to update in Network Security

Global Correlation failed to update

Global Correlation failed to update