topic Re: pix 501 firewall in Network Security https://community.cisco.com/t5/network-security/pix-501-firewall/m-p/379561#M551789 <HTML><HEAD></HEAD><BODY><P>"show run" should work.</P><P></P><P>It will work only from privilege mode. </P><P></P><P>pix&gt;enable (prompt for password)</P><P>pix#show run</P></BODY></HTML> Mon, 07 Feb 2005 16:51:36 GMT thisisshanky 2005-02-07T16:51:36Z pix 501 firewall https://community.cisco.com/t5/network-security/pix-501-firewall/m-p/379560#M551788 <P>hello, my client has a pix 501 firewall/router. I need the commands so i can see the current config of the device. i searched the site and found a link but just reading it gave me a headace. i really dont do much cisco so any help would be appreciated.</P><P></P><P>Thanks</P><P></P><P>Joe </P> Fri, 21 Feb 2020 07:55:12 GMT https://community.cisco.com/t5/network-security/pix-501-firewall/m-p/379560#M551788 Johnny_dagger 2020-02-21T07:55:12Z Re: pix 501 firewall https://community.cisco.com/t5/network-security/pix-501-firewall/m-p/379561#M551789 <HTML><HEAD></HEAD><BODY><P>"show run" should work.</P><P></P><P>It will work only from privilege mode. </P><P></P><P>pix&gt;enable (prompt for password)</P><P>pix#show run</P></BODY></HTML> Mon, 07 Feb 2005 16:51:36 GMT https://community.cisco.com/t5/network-security/pix-501-firewall/m-p/379561#M551789 thisisshanky 2005-02-07T16:51:36Z