topic Re: route-map on PIX 515E? in Network Security https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393068#M553740 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>route-map support was introduced, in 6.3 version, only for redistribution and filter list in OSPF routing process.</P><P>Policy routing is not supported at this moment, like other features (NBMA or point to point network, route load balancing, etc...) I think it'll could be in the next newer 7.0 version.</P><P></P><P>Regads,</P><P>G.</P></BODY></HTML> Wed, 22 Dec 2004 10:25:50 GMT g.rodegari 2004-12-22T10:25:50Z route-map on PIX 515E? https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393064#M553736 <P>Hi everyone. I have a scenario where I would like to forward all smtp traffic out one gateway, 1.1.1.1 and all other traffic out gateway 1.1.1.2.</P><P></P><P>The PIX is connected to my internal network, 10.10.1.0 and there is a static nat translation for host 10.10.1.5 = 1.1.1.5. For all other 10.10.1.x hosts, data should route to the gateway 1.1.1.2</P><P></P><P>I would like for all traffic OUTBOUND from 10.10.1.5 to be routed to gateway 1.1.1.1</P><P></P><P>Currently, I have the following statement on my PIX:</P><P>route outside 0.0.0.0 0.0.0.0 1.1.1.2 1</P><P></P><P>Can I use route-maps to allow ONLY smtp traffic from Internal address 10.10.1.5 (static nat address of 1.1.1.5) to be forwarded to gateway 1.1.1.1?</P><P></P><P>Thank you.</P> Fri, 21 Feb 2020 07:48:47 GMT https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393064#M553736 robdog01 2020-02-21T07:48:47Z Re: route-map on PIX 515E? https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393065#M553737 <HTML><HEAD></HEAD><BODY><P>No, route-maps are available only on routers. Btw PIX is not a true router.</P></BODY></HTML> Fri, 17 Dec 2004 06:09:52 GMT https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393065#M553737 thisisshanky 2004-12-17T06:09:52Z Re: route-map on PIX 515E? https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393066#M553738 <HTML><HEAD></HEAD><BODY><P>I'm using 6.3(3) and the route-map commands are there and available. Also, the match commands are available.</P><P></P><P>If the pix is not designed to do it, I wonder why they provide those commands?</P><P></P><P>Does anyone have a recommendation as to how I should approach this?</P><P></P><P>Thanks!</P></BODY></HTML> Fri, 17 Dec 2004 17:00:04 GMT https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393066#M553738 robdog01 2004-12-17T17:00:04Z Re: route-map on PIX 515E? https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393067#M553739 <HTML><HEAD></HEAD><BODY><P>The route-map commands are there for use in redistribution in regards to routing protocols. For instance I am using the route-map command to redistribute a connected interface into OSPF on the PIX.</P></BODY></HTML> Fri, 17 Dec 2004 19:10:12 GMT https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393067#M553739 JHaynes4 2004-12-17T19:10:12Z Re: route-map on PIX 515E? https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393068#M553740 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>route-map support was introduced, in 6.3 version, only for redistribution and filter list in OSPF routing process.</P><P>Policy routing is not supported at this moment, like other features (NBMA or point to point network, route load balancing, etc...) I think it'll could be in the next newer 7.0 version.</P><P></P><P>Regads,</P><P>G.</P></BODY></HTML> Wed, 22 Dec 2004 10:25:50 GMT https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393068#M553740 g.rodegari 2004-12-22T10:25:50Z Re: route-map on PIX 515E? https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393069#M553741 <HTML><HEAD></HEAD><BODY><P>Could I put a router between the firewall and 2 gateways that the pix would use as its default gateway, then on that router, enable the policy routing?</P><P></P><P>Thanks,</P><P>Robert.</P></BODY></HTML> Wed, 22 Dec 2004 17:53:24 GMT https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393069#M553741 robdog01 2004-12-22T17:53:24Z Re: route-map on PIX 515E? https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393070#M553742 <HTML><HEAD></HEAD><BODY><P>Hi Robert,</P><P></P><P>I think yes.</P><P></P><P>G.</P></BODY></HTML> Thu, 23 Dec 2004 12:03:17 GMT https://community.cisco.com/t5/network-security/route-map-on-pix-515e/m-p/393070#M553742 g.rodegari 2004-12-23T12:03:17Z