topic Re: Loading 501 PIX PDM in Network Security

Loading 501 PIX PDM

aftermath — Fri, 21 Feb 2020 07:45:57 GMT

I feel funny about asking this question since I have ANSWERED some much more difficult. However, I am having an issue loading PDM from a tftp server onto the PIX...

I know that PDM is already on it, but I am having a problem getting it going..

Any suggestions..The config is attached..

Thank you.....

Re: Loading 501 PIX PDM

jmia — Tue, 23 Nov 2004 08:31:27 GMT

Tony,

You might have read the following document, but if not, have a read:

http://www.cisco.com/warp/public/110/upgrade.shtml

Hope it helps,

Jay

Re: Loading 501 PIX PDM

aftermath — Tue, 23 Nov 2004 10:12:10 GMT

I actaully have that, and used it's suggestions, so thank you.

I am actually getting the error listed below while trying to load PDM..It seems to be TIMIMG out, attempting to connect.

Thanks..

PIXNET# copy tftp flash

Address or name of remote host [0.0.0.0]? 192.168.1.1

Source file name [cdisk]? pix301.bin

copying tftp://192.168.1.1/pix301.bin to flash:image

[yes|no|again]? y

tftp: Timed out attempting to connect

Image not installed

Re: Loading 501 PIX PDM

aftermath — Mon, 29 Nov 2004 02:31:26 GMT

I am trying to load the PDM on a 501 PIX 6.3

But it keeps erroring out.." timed out attempting to connect "

Can someone look at the config above, and tell me if I have the commands in the proper order!

I can ping, and do a one hop trace to the inside PIX interface, but for some reason, it just will not hook up.

Any suggestions??