topic Re: Cisco Pix 515 in Network Security

Cisco Pix 515

ciscopaul — Fri, 21 Feb 2020 07:43:51 GMT

Hi all,

I am running SNMP on my cisco pix and when I ran the MRTG software:

I get this error message:

### Interface 1 >> Descr: 'PIX-Firewall-'outside'-interface' | Name: '' | Ip: '207.215.60.67' | Eth: '00-50-54-ff-34-12' ###

### The following interface is commented out because:

### * --ifref=name is not unique for this interface

How do I name the outside and the inside interface?

The name has to be unique in order for snmp to work.

Thanks for your prompt reply.

Paul Hong

laje — Fri, 05 Nov 2004 18:41:06 GMT

nameif e0 outside security0

nameif e1 inside security100

run a "show interface" to ensure no other interface shares the same name.

Cheers

ciscopaul — Fri, 05 Nov 2004 21:22:40 GMT

Thanks Laje,

I already check that and its correct.

I also try

name e0 outside

name e1 inside

But still no change

Any other ideas?

Thanks much

Paul Hong