Allow tracert and pathping through firewall

Andy White — Mon, 11 Mar 2019 20:28:59 GMT

Hello,

Whenever I pathping or tracert from my PC through the firewall to other VLAN's (sub interfaces) or VPN's, where don't see the IP's appear like below, we just get lots of *, Iguess it is just hinding itself. Can I get this to show?

If I pathping or tracert from my PC to an IP on the internet it is fine.

C:\Users\admin>pathping 172.30.11.20

Tracing route to 172.30.11.20 over a maximum of 30 hops

0 wksadmin.f1.local [192.168.9.11]

1 192.168.9.253

2 * * *

Computing statistics for 25 seconds...

Thanks

Re: Allow tracert and pathping through firewall

sean_evershed — Wed, 04 May 2011 09:25:37 GMT

Hi, Do you have ICMP inspection enabled or an ACL configured on your firewall? See below

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094e8a.shtml

topic Re: Allow tracert and pathping through firewall in Network Security

Allow tracert and pathping through firewall

Re: Allow tracert and pathping through firewall