topic PIX 501 Failed??? in Network Security https://community.cisco.com/t5/network-security/pix-501-failed/m-p/483204#M556971 <P>I've got a PIX 501 that was working fine, but now the VPN led and port 1 100mbps led flash when I power it up.</P><P></P><P>I can't seem to find anything online to help me troubleshoot this.</P><P></P><P>I can't get any console info, and the other lights don't come on even if there are cables attached.</P><P></P><P>Any suggestions?</P><P></P><P>Thanks</P><P></P><P>Ed</P><P></P> Fri, 21 Feb 2020 08:13:06 GMT ekuhner 2020-02-21T08:13:06Z PIX 501 Failed??? https://community.cisco.com/t5/network-security/pix-501-failed/m-p/483204#M556971 <P>I've got a PIX 501 that was working fine, but now the VPN led and port 1 100mbps led flash when I power it up.</P><P></P><P>I can't seem to find anything online to help me troubleshoot this.</P><P></P><P>I can't get any console info, and the other lights don't come on even if there are cables attached.</P><P></P><P>Any suggestions?</P><P></P><P>Thanks</P><P></P><P>Ed</P><P></P> Fri, 21 Feb 2020 08:13:06 GMT https://community.cisco.com/t5/network-security/pix-501-failed/m-p/483204#M556971 ekuhner 2020-02-21T08:13:06Z Re: PIX 501 Failed??? https://community.cisco.com/t5/network-security/pix-501-failed/m-p/483205#M556972 <HTML><HEAD></HEAD><BODY><P>Sounds like a hardware issue. Do you have the console cable connected when you power it up? If you do and still don't get any response on the terminal window, I'd say it is a hardware issue especially of it was working fine previously.</P></BODY></HTML> Mon, 20 Jun 2005 13:07:35 GMT https://community.cisco.com/t5/network-security/pix-501-failed/m-p/483205#M556972 noelf 2005-06-20T13:07:35Z