topic Re: ips- error connecting to sensor in Network Security

ips- error connecting to sensor

kp-tkr2014 — Fri, 21 Feb 2020 17:28:23 GMT

Hi,

Card Type: ASA_5500_Series_Security_Services_Module-10

Model: ASA-SSM-10

App. name: IPS

App. Status: Up

App. Status Desc:

App. version: 6.2(1)E3

Data Plane Status: Up

ASA version 5520

I cannot connect to ips module on asa 5520 , it is giving an error message " error connecting to sensor "

Status: Up

Thanks

balaji.bandi — Sun, 08 Sep 2019 14:20:31 GMT

Look the below thread may help you

kp-tkr2014 — Mon, 09 Sep 2019 01:35:06 GMT

Hi,

The asa is in production , I can see the ips is using the default ip address 192.168.1.2,

From asa teminal , how can I verify the ips module has properly configured or it s just running ?

Thanks

balaji.bandi — Mon, 09 Sep 2019 07:19:06 GMT

have this module configured before or working ? or you try to configure?

here is the guide if you have a default IP address :