Correct way to source AND destination nat ftp

Jerry Plumley — Mon, 11 Mar 2019 20:21:01 GMT

Cisco Adaptive Security Appliance Software Version 8.3(2)
Device Manager Version 6.3(4)

Hello all, I've tried umteen variations to get this working and can't get the active data (port) channel to work. Here's the deal....

Coming in my external interface via the tunnel I have tunnel_src and tunnel_dst ip addresses that I need to source and destination nat to internal addresses. What is the best way to do this?

Thanks, Jeff

Re: Correct way to source AND destination nat ftp

Jerry Plumley — Thu, 14 Apr 2011 18:53:27 GMT

hey guys nevermind, this entire section was missing. Should have done a reset to factory when I got the device.

class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
!

topic Re: Correct way to source AND destination nat ftp in Network Security

Correct way to source AND destination nat ftp

Re: Correct way to source AND destination nat ftp