topic Re: Transparent firewall/PIX with multiple context in Network Security https://community.cisco.com/t5/network-security/transparent-firewall-pix-with-multiple-context/m-p/492582#M557882 <HTML><HEAD></HEAD><BODY><P>That URL gave me a 404 error did cisco move it on the site?</P></BODY></HTML> Thu, 23 Jun 2005 16:52:28 GMT james.e.mcwilliams 2005-06-23T16:52:28Z Transparent firewall/PIX with multiple context https://community.cisco.com/t5/network-security/transparent-firewall-pix-with-multiple-context/m-p/492580#M557880 <P>When configuring transparent firewall (PIX525 ver. 7.0(1)) with multiple context. Everything seems to work but I see many packet drops like show below is this normal due to the MAC discover where the first packet is dropped or ?:</P><P></P><P>C525-PIX/Context1(config)# sh int</P><P>Interface Ethernet4 "inside-1", is up, line protocol is up</P><P> MAC address 00e0.b606.5f79, MTU 1500</P><P> IP address 192.168.0.238, subnet mask 255.255.255.0</P><P> Received 693416 packets, 39479567 bytes</P><P> Transmitted 792 packets, 56735 bytes</P><P> Dropped 331906 packets</P><P>Interface GigabitEthernet0.131 "outside-1", is up, line protocol is up</P><P> MAC address 0003.47e2.fbb6, MTU 1500</P><P> IP address 192.168.0.238, subnet mask 255.255.255.0</P><P> Received 46268 packets, 2330611 bytes</P><P> Transmitted 361700 packets, 20114836 bytes</P><P> Dropped 45477 packets</P><P></P><P></P><P>Thanks</P><P></P><P>Gert Schaarup</P> Fri, 21 Feb 2020 08:10:04 GMT https://community.cisco.com/t5/network-security/transparent-firewall-pix-with-multiple-context/m-p/492580#M557880 g.schaarup 2020-02-21T08:10:04Z Re: Transparent firewall/PIX with multiple context https://community.cisco.com/t5/network-security/transparent-firewall-pix-with-multiple-context/m-p/492581#M557881 <HTML><HEAD></HEAD><BODY><P>The following URL discusses how exactly the multiple context works, guess this should help you understand the whole thing</P><P><A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_70/config/contexts.htm#wp1116332" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_70/config/contexts.htm#wp1116332</A></P></BODY></HTML> Tue, 31 May 2005 13:08:14 GMT https://community.cisco.com/t5/network-security/transparent-firewall-pix-with-multiple-context/m-p/492581#M557881 pradeepde 2005-05-31T13:08:14Z Re: Transparent firewall/PIX with multiple context https://community.cisco.com/t5/network-security/transparent-firewall-pix-with-multiple-context/m-p/492582#M557882 <HTML><HEAD></HEAD><BODY><P>That URL gave me a 404 error did cisco move it on the site?</P></BODY></HTML> Thu, 23 Jun 2005 16:52:28 GMT https://community.cisco.com/t5/network-security/transparent-firewall-pix-with-multiple-context/m-p/492582#M557882 james.e.mcwilliams 2005-06-23T16:52:28Z