PIX 506E stop working

m.hossein — Fri, 21 Feb 2020 08:09:46 GMT

Dear All,

I am Network Admin. for an IT company, we have few numbers of PIX firewalls

spreaded between our branches...

Few days ago One of those PIX Firewalls "PIX 506E" stopped working

properly... I tried to access it using Console interface but failed to get

into the box...

When I try to connect with console and power On the Box I got the following:

----------------------------------------------------

CISCO SYSTEMS PIX FIREWALL

Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73

Compiled by morlee

32 MB RAM

PCI Device Table.

Bus Dev Func VendID DevID Class Irq

00 00 00 8086 7192 Host Bridge

00 07 00 8086 7110 ISA Bridge

00 07 01 8086 7111 IDE Controller

00 07 02 8086 7112 Serial Bus 9

00 07 03 8086 7113 PCI Bridge

00 0D 00 8086 1209 Ethernet 11

00 0E 00 8086 1209 Ethernet 10

----------------------------------------------------

and the cursor stopped response and that is everything I can get from the

PIX....

I tried to connect it directly to my Laptop using Cross cable but I did not

get any feedback except that the Ethernet Led started work with green

light..

I tried to ping the PIX after adjusting my Laptop's IP address to be in the

same segment but I got request timed out.

The Power Led and Network Led gave me green Light and in the back interface

the Console, Act and Link for both Ethernet interface gave me the same green

light...

Please help me to figure out the problem and how to solve it Sooner...

Awaiting for your reply...

Best regards,,,

Magdy Hossein

Network admin.

MAS Technology

Re: PIX 506E stop working

m.hossein — Tue, 24 May 2005 13:28:37 GMT

Dear All,,

Thanks All for your help...

I resolved the problem by adjusting the jumpers inside the PIX...

It works fine now...

Thanks again

Best regards,,,

Magdy Hossein

MAS Technology

topic PIX 506E stop working in Network Security

PIX 506E stop working

Re: PIX 506E stop working