topic Re: VMWare Security Server in Network Security

VMWare Security Server

abbas.ali — Mon, 11 Mar 2019 20:16:43 GMT

Does someone have a template or config who can share.

Basically, I have a VMWare Security server connected to Cisco ASA Firewall on a DMZ segment. I also have connection Server sand a Desktop Viewer on ASA Inside Segment. Outside users from Internet/VPN will be connecting to Security Server first for authentication and then will be routed to Connection Servers on ASA Inside Segment. I need to configure ASA to make that happen and wondering if someone has a template config or point me to CCO where I can get detailed information regarding this configuration.

Thanks,

Re: VMWare Security Server

padatta — Tue, 05 Apr 2011 07:38:53 GMT

Hi,

Can i have more details on the setup?

What does a VMWare Security server do? What protocols will it use for authenticating outside users?

After authentication, will users reconnect to inside Connection Servers, or will the VMWare Security server act like a proxy between inside Connection Servers and outside hosts?

If this is the case then we can use cutthrough proxy on ASA.

The following example should give more insight.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807349e7.shtml

Paps