topic Pix 7 transparent with multiple context in Network Security https://community.cisco.com/t5/network-security/pix-7-transparent-with-multiple-context/m-p/402681#M558744 <P>Hi all, I try to do multiple context in transparent mode. My idee is to make a second IP for admin purpose that is not routed within the Internet and only accessible from my inside network.interface </P><P></P><P>Ethernet0.1</P><P> vlan 1</P><P>!</P><P>interface Ethernet0.2</P><P> shutdown</P><P> no vlan</P><P>!</P><P>interface Ethernet1</P><P>!</P><P>interface Ethernet1.1</P><P> shutdown</P><P> no vlan</P><P>!</P><P>interface Ethernet1.2</P><P> shutdown</P><P> no vlan </P><P></P><P>Major Problem: I can not allocate the same VLAN to both interfaces (subinterface inside, subinterface outside). I mean if I allocate the Eth0.1 to vlan1 I need to configure the Eth1.1 with a other vlan ID !!! But in this case: The firewall is not transparent or do I something wrong? </P> Fri, 21 Feb 2020 08:07:09 GMT YOUNG-SOO BASLER 2020-02-21T08:07:09Z Pix 7 transparent with multiple context https://community.cisco.com/t5/network-security/pix-7-transparent-with-multiple-context/m-p/402681#M558744 <P>Hi all, I try to do multiple context in transparent mode. My idee is to make a second IP for admin purpose that is not routed within the Internet and only accessible from my inside network.interface </P><P></P><P>Ethernet0.1</P><P> vlan 1</P><P>!</P><P>interface Ethernet0.2</P><P> shutdown</P><P> no vlan</P><P>!</P><P>interface Ethernet1</P><P>!</P><P>interface Ethernet1.1</P><P> shutdown</P><P> no vlan</P><P>!</P><P>interface Ethernet1.2</P><P> shutdown</P><P> no vlan </P><P></P><P>Major Problem: I can not allocate the same VLAN to both interfaces (subinterface inside, subinterface outside). I mean if I allocate the Eth0.1 to vlan1 I need to configure the Eth1.1 with a other vlan ID !!! But in this case: The firewall is not transparent or do I something wrong? </P> Fri, 21 Feb 2020 08:07:09 GMT https://community.cisco.com/t5/network-security/pix-7-transparent-with-multiple-context/m-p/402681#M558744 YOUNG-SOO BASLER 2020-02-21T08:07:09Z Re: Pix 7 transparent with multiple context https://community.cisco.com/t5/network-security/pix-7-transparent-with-multiple-context/m-p/402682#M558745 <HTML><HEAD></HEAD><BODY><P>Although inside IP addresses can be the same across contexts, keeping them unique is easier to manage.</P><P><A class="jive-link-custom" href="http://cisco.com/en/US/products/hw/switches/ps708/products_module_configuration_guide_chapter09186a00802010bd.html#wp1052835" target="_blank">http://cisco.com/en/US/products/hw/switches/ps708/products_module_configuration_guide_chapter09186a00802010bd.html#wp1052835</A></P></BODY></HTML> Fri, 06 May 2005 14:01:16 GMT https://community.cisco.com/t5/network-security/pix-7-transparent-with-multiple-context/m-p/402682#M558745 didyap 2005-05-06T14:01:16Z Re: Pix 7 transparent with multiple context https://community.cisco.com/t5/network-security/pix-7-transparent-with-multiple-context/m-p/402683#M558746 <HTML><HEAD></HEAD><BODY><P>Found a easy way.......... </P><P></P><P></P><P>firewall transparent</P><P>!</P><P>interface Ethernet0</P><P>!</P><P>interface Ethernet1</P><P>!</P><P>interface Ethernet4</P><P></P><P>etc.</P><P></P><P>admin-context admin</P><P>context admin</P><P> allocate-interface Ethernet4 </P><P> config-url flash:/admin.cfg</P><P>!</P><P></P><P>context datatraffic</P><P> allocate-interface Ethernet0 </P><P> allocate-interface Ethernet1 </P><P> config-url flash:/datatraffic.cfg</P><P></P><P></P><P></P><P></P><P>context datatraffic</P><P>interface Ethernet1</P><P> nameif outside</P><P> security-level 0</P><P>!</P><P>interface Ethernet0</P><P> nameif inside</P><P> security-level 100</P><P></P><P>etc....</P><P></P><P></P><P></P><P>context admin</P><P>interface Ethernet4</P><P> nameif inside</P><P> security-level 100</P><P></P><P>ip address (your management ip address)</P><P>route inside 0.0.0.0 0.0.0.0 (your gateway)</P></BODY></HTML> Fri, 13 May 2005 11:57:29 GMT https://community.cisco.com/t5/network-security/pix-7-transparent-with-multiple-context/m-p/402683#M558746 YOUNG-SOO BASLER 2005-05-13T11:57:29Z