topic Re: convert 8.3x remote access nat to 8.2 version in Network Security https://community.cisco.com/t5/network-security/convert-8-3x-remote-access-nat-to-8-2-version/m-p/1580032#M560165 <HTML><HEAD></HEAD><BODY><P>thank you very much!</P></BODY></HTML> Sun, 13 Mar 2011 01:04:01 GMT lcaruso 2011-03-13T01:04:01Z convert 8.3x remote access nat to 8.2 version https://community.cisco.com/t5/network-security/convert-8-3x-remote-access-nat-to-8-2-version/m-p/1580029#M560159 <P>Hi,</P><P></P><P>I've been working in 8.3 for all of my remote access vpn configs. Can someone help me correctly convert this to 8.2 version?</P><P></P><P>Here is my 8.3 version (I've omitted what I believe does not require conversion, correct me if I'm wrong)</P><PRE __jive_macro_name="quote" class="jive_text_macro jive_macro_quote"><P>object network inside-network<BR /> subnet 192.168.2.0 255.255.255.0</P><P></P><P>object network user-vpn <BR /> subnet 10.10.222.0 255.255.255.0</P><P><BR />object network admin-vpn <BR /> subnet 10.10.223.0 255.255.255.0</P><P></P><P>access-list split_tunnel extended permit ip object inside-network object admin-vpn log <BR />access-list split_tunnel extended permit ip object inside-network object user-vpn log </P><P></P><P>nat (inside,outside) source static inside-network inside-network destination static admin-vpn admin-vpn<BR />nat (inside,outside) source static inside-network inside-network destination static user-vpn user-vpn</P></PRE><P></P><P>The 8.2 ASA currently has this for nat</P><PRE __jive_macro_name="quote" class="jive_text_macro jive_macro_quote">nat (inside) 0 access-list inside_nat0_outbound<BR />nat (inside) 1 0.0.0.0 0.0.0.0<BR /></PRE> Mon, 11 Mar 2019 20:05:29 GMT https://community.cisco.com/t5/network-security/convert-8-3x-remote-access-nat-to-8-2-version/m-p/1580029#M560159 lcaruso 2019-03-11T20:05:29Z Re: convert 8.3x remote access nat to 8.2 version https://community.cisco.com/t5/network-security/convert-8-3x-remote-access-nat-to-8-2-version/m-p/1580030#M560161 <HTML><HEAD></HEAD><BODY><P>The conversion should be as follows:</P><P></P><P>access-list inside_nat0_outbound permit ip 192.168.2.0 255.255.255.0 10.10.223.0 255.255.255.0</P><P>access-list inside_nat0_outbound permit ip 192.168.2.0 255.255.255.0 10.10.222.0 255.255.255.0</P><P>nat (inside) 0 access-list inside_nat0_outbound</P><P></P><P>Hope that helps.</P></BODY></HTML> Sat, 12 Mar 2011 23:17:08 GMT https://community.cisco.com/t5/network-security/convert-8-3x-remote-access-nat-to-8-2-version/m-p/1580030#M560161 Jennifer Halim 2011-03-12T23:17:08Z Re: convert 8.3x remote access nat to 8.2 version https://community.cisco.com/t5/network-security/convert-8-3x-remote-access-nat-to-8-2-version/m-p/1580031#M560163 <HTML><HEAD></HEAD><BODY><P>And the split tunnel will be as follows:</P><P></P><P>access-list split_tunnel standard permit 192.168.2.0 255.255.255.0</P></BODY></HTML> Sat, 12 Mar 2011 23:18:11 GMT https://community.cisco.com/t5/network-security/convert-8-3x-remote-access-nat-to-8-2-version/m-p/1580031#M560163 Jennifer Halim 2011-03-12T23:18:11Z Re: convert 8.3x remote access nat to 8.2 version https://community.cisco.com/t5/network-security/convert-8-3x-remote-access-nat-to-8-2-version/m-p/1580032#M560165 <HTML><HEAD></HEAD><BODY><P>thank you very much!</P></BODY></HTML> Sun, 13 Mar 2011 01:04:01 GMT https://community.cisco.com/t5/network-security/convert-8-3x-remote-access-nat-to-8-2-version/m-p/1580032#M560165 lcaruso 2011-03-13T01:04:01Z