topic Re: ASA SSL certificates for management access/ASDM applet signi in Network Security

ASA SSL certificates for management access/ASDM applet signing

MaximBudyonny — Mon, 11 Mar 2019 20:34:50 GMT

When I connect to ASA via https I've got ASA internally created SSL certificate.

Also ASDM applets are signed with the ASA internally created certificate.

How can I replace those certificates with the certificates issued by our internal CA?

Creating trustpoints (full trustpoint creation cycle, i.e. keypair, creating CSR, installing cert, authenticating trustpoint) named ASDM_TrustPoint0 and CodeSigner doesn't help.

Re: ASA SSL certificates for management access/ASDM applet signi

mirober2 — Mon, 23 May 2011 16:26:10 GMT

Hello,

If you already have the trustpoint configured, you just need to reference it using the following command:

ssl trust-point

This is the command ASDM uses to determine which trustpoint should be used for SSL connections. Here is the command reference:

http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/s8.html#wp1511555

Hope that helps.

-Mike

Re: ASA SSL certificates for management access/ASDM applet signi

MaximBudyonny — Thu, 26 May 2011 20:07:24 GMT

Thank you. It's exactly I have searched for.