topic Re: configuring Multiple Internet Gateways using PIX Firewall in Network Security https://community.cisco.com/t5/network-security/configuring-multiple-internet-gateways-using-pix-firewall/m-p/370201#M562444 <HTML><HEAD></HEAD><BODY><P>It is not possible to do on PIX. As you can have single default gateway on PIX so your entire internet traffic will always go with single link only.</P><P> You need to have Router for this.</P><P></P><P>HTH ,</P><P>Sachin Jain</P><P> </P></BODY></HTML> Wed, 12 Jan 2005 06:33:24 GMT sachin 2005-01-12T06:33:24Z configuring Multiple Internet Gateways using PIX Firewall https://community.cisco.com/t5/network-security/configuring-multiple-internet-gateways-using-pix-firewall/m-p/370199#M562398 <P>I have a requirement of providing Internet access to INSIDE users based on groups using a PIX firewall with multiple Zones connecting to 3 Internet uplinks ( different modes like 1 Leased Line, 1 ADSL &amp; 1 ISDN ) as shown in the enclosed slide. </P><P></P><P>Can somebody suggest me the configuration to be done in PIX firewall for accomodating this multiple Internet gateways or any workaround solution to suit my requirement.</P><P></P><P>Thnking you in advance</P><P></P><P>Sundar</P><P></P><P> </P><P></P> Fri, 21 Feb 2020 07:51:47 GMT https://community.cisco.com/t5/network-security/configuring-multiple-internet-gateways-using-pix-firewall/m-p/370199#M562398 meensun 2020-02-21T07:51:47Z Re: configuring Multiple Internet Gateways using PIX Firewall https://community.cisco.com/t5/network-security/configuring-multiple-internet-gateways-using-pix-firewall/m-p/370200#M562416 <HTML><HEAD></HEAD><BODY><P>group1 let's say 172.16.10.0 can leave interface 0</P><P>nat (inside) 1 172.16.10.0 255.255.255.0</P><P>global (outside) 1 interface</P><P></P><P>group2 172.16.20.0 can leave interface 2</P><P>nat (inside) 2 172.16.20.0 255.255.255.0</P><P>global (dmz1) 2 interface</P><P></P><P>group3 172.16.30.0 can leave interface 3</P><P>nat (inside) 3 172.16.30.0 255.255.255.0</P><P>global (dmz2) 3 interface</P><P></P><P>Erick</P><P></P><P></P><P></P><P></P></BODY></HTML> Tue, 11 Jan 2005 16:04:07 GMT https://community.cisco.com/t5/network-security/configuring-multiple-internet-gateways-using-pix-firewall/m-p/370200#M562416 erickflamenco 2005-01-11T16:04:07Z Re: configuring Multiple Internet Gateways using PIX Firewall https://community.cisco.com/t5/network-security/configuring-multiple-internet-gateways-using-pix-firewall/m-p/370201#M562444 <HTML><HEAD></HEAD><BODY><P>It is not possible to do on PIX. As you can have single default gateway on PIX so your entire internet traffic will always go with single link only.</P><P> You need to have Router for this.</P><P></P><P>HTH ,</P><P>Sachin Jain</P><P> </P></BODY></HTML> Wed, 12 Jan 2005 06:33:24 GMT https://community.cisco.com/t5/network-security/configuring-multiple-internet-gateways-using-pix-firewall/m-p/370201#M562444 sachin 2005-01-12T06:33:24Z Re: configuring Multiple Internet Gateways using PIX Firewall https://community.cisco.com/t5/network-security/configuring-multiple-internet-gateways-using-pix-firewall/m-p/370202#M562463 <HTML><HEAD></HEAD><BODY><P>Please refer the below link</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_qanda_item09186a0080094874.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_qanda_item09186a0080094874.shtml</A></P><P></P><P>and go to the question---</P><P>Can I connect two different ISPs to my Cisco Secure PIX Firewall (for load-balancing)? </P><P></P><P></P><P>HTH,</P><P>Sachin Jain</P></BODY></HTML> Wed, 12 Jan 2005 09:21:12 GMT https://community.cisco.com/t5/network-security/configuring-multiple-internet-gateways-using-pix-firewall/m-p/370202#M562463 sachin 2005-01-12T09:21:12Z Re: configuring Multiple Internet Gateways using PIX Firewall https://community.cisco.com/t5/network-security/configuring-multiple-internet-gateways-using-pix-firewall/m-p/370203#M562482 <HTML><HEAD></HEAD><BODY><P>As you could see in the diagram, the guy is using three diferent interfaces, one for each ISP.</P><P></P><P>If he has problem with not so independent network segments to route the source traffic, he can use access-lists instead well defined networks on nat command.</P><P></P><P>Erick</P><P></P><P></P></BODY></HTML> Wed, 12 Jan 2005 21:47:04 GMT https://community.cisco.com/t5/network-security/configuring-multiple-internet-gateways-using-pix-firewall/m-p/370203#M562482 erickflamenco 2005-01-12T21:47:04Z Re: configuring Multiple Internet Gateways using PIX Firewall https://community.cisco.com/t5/network-security/configuring-multiple-internet-gateways-using-pix-firewall/m-p/370204#M562494 <HTML><HEAD></HEAD><BODY><P>Focus on delivering it to your outside interface, then have a router select circuit based upon policy based routing.</P></BODY></HTML> Wed, 12 Jan 2005 22:10:00 GMT https://community.cisco.com/t5/network-security/configuring-multiple-internet-gateways-using-pix-firewall/m-p/370204#M562494 jason.aarons 2005-01-12T22:10:00Z