topic Re: PIX failover link. in Network Security https://community.cisco.com/t5/network-security/pix-failover-link/m-p/362721#M562453 <HTML><HEAD></HEAD><BODY><P>Ideally it should all be the exact same hardware. You may run into issues if you configure statefull failover. ther other PIX may not be able to keep in the states.</P></BODY></HTML> Thu, 09 Dec 2004 18:56:38 GMT nkhawaja 2004-12-09T18:56:38Z PIX failover link. https://community.cisco.com/t5/network-security/pix-failover-link/m-p/362720#M562423 <P>Hi! In my organization there are two PIX 525 firewalls and I would like to use the second one as failover PIX. The point is that both PIX 525 have the same specifications and IOS, but the RAM only is different. </P><P>Will this difference in RAM capacities allow me to make a failover link between these appliances? </P><P>Any one who has a precise idea? </P><P>Thanks, </P><P></P><P>Ard</P> Fri, 21 Feb 2020 07:47:40 GMT https://community.cisco.com/t5/network-security/pix-failover-link/m-p/362720#M562423 ardi1 2020-02-21T07:47:40Z Re: PIX failover link. https://community.cisco.com/t5/network-security/pix-failover-link/m-p/362721#M562453 <HTML><HEAD></HEAD><BODY><P>Ideally it should all be the exact same hardware. You may run into issues if you configure statefull failover. ther other PIX may not be able to keep in the states.</P></BODY></HTML> Thu, 09 Dec 2004 18:56:38 GMT https://community.cisco.com/t5/network-security/pix-failover-link/m-p/362721#M562453 nkhawaja 2004-12-09T18:56:38Z