topic Re: ASA Upgrade in Network Security

ASA Upgrade

sarojpradhan — Mon, 11 Mar 2019 20:31:59 GMT

i am using Cisco ASA 5510 with ASA Version 8.0(4) and memory 256MB.

Please guide me to Upgrade it to 8.3

Thanks,

Saroj

Re: ASA Upgrade

varrao — Wed, 11 May 2011 14:01:55 GMT

Hi Saroj,

This all that you would need for upgrading the firewall:

https://supportforums.cisco.com/docs/DOC-12690

Let me know if you need any other help.

P.S.- rate the post if helpful.

Varun

Re: ASA Upgrade

PAUL GILBERT ARIAS — Wed, 11 May 2011 14:04:11 GMT

Hi,

You will need to upgrade the memory first, here are the details about memory:

http://www.cisco.com/en/US/docs/security/asa/asa83/release/notes/asarn83.html#wp454755

The part number for the required memory is ASA5510-MEM-1GB=

After that you should be able to load 8.3 on your system.

Re: ASA Upgrade

Mohamed Sobair — Wed, 11 May 2011 14:06:28 GMT

Hi Saroj,

Use for example TFTP-32, its free to download, put the new IOS in the correct directory path in your PC.

configure the following on your ASA:

tftp-server inside (Your Machine IP address) and (the directory of the bin File)

and then , perform the fololowing:

copy tftp flash, and follow . it will ask you to install the new IOS.

after you successfuly install the new IOS, check it with the (dir) command.

let me know if this nswers your question,

Note:

A memory upgrade is required for version 8.3

Regards,

Mohamed

Re: ASA Upgrade

sarojpradhan — Fri, 13 May 2011 13:41:56 GMT

Thanks for the Reply.

i have a query will the upgrade stright from IOS 8.0 (4) to IOS 8.3

it is first upgrade IOS 8.1 Then 8.3

Thanks,

Saroj

Re: ASA Upgrade

sarojpradhan — Fri, 13 May 2011 13:42:43 GMT

Thanks for the Reply.

i have a query will the upgrade stright from IOS 8.0 (4) to IOS 8.3

it is first upgrade IOS 8.1 Then 8.3

Thanks,

Saroj

Re: ASA Upgrade

varrao — Fri, 13 May 2011 13:47:30 GMT

Saroj,

You should follow this upgrade chain:

8.0------------>

8.2------------->

8.3

That is the right procedure.

Please make sure your memeory requirements are correct.

You need to follow this doc, it is a good one:

https://supportforums.cisco.com/docs/DOC-12690

P.S.- rate the post if helpful.

Thanks,

Varun