topic How do I open a range of ports on a Pix? in Network Security https://community.cisco.com/t5/network-security/how-do-i-open-a-range-of-ports-on-a-pix/m-p/1724892#M562806 <P>I need to open the following ports on a pix:</P><P></P><P>tcp 3230 to 3235</P><P>udp 3230 to 3253</P><P></P><P>Attached is my config file.</P><P></P><P>How do I open the ports?</P> Mon, 11 Mar 2019 20:31:05 GMT fullerthaler 2019-03-11T20:31:05Z How do I open a range of ports on a Pix? https://community.cisco.com/t5/network-security/how-do-i-open-a-range-of-ports-on-a-pix/m-p/1724892#M562806 <P>I need to open the following ports on a pix:</P><P></P><P>tcp 3230 to 3235</P><P>udp 3230 to 3253</P><P></P><P>Attached is my config file.</P><P></P><P>How do I open the ports?</P> Mon, 11 Mar 2019 20:31:05 GMT https://community.cisco.com/t5/network-security/how-do-i-open-a-range-of-ports-on-a-pix/m-p/1724892#M562806 fullerthaler 2019-03-11T20:31:05Z Re: How do I open a range of ports on a Pix? https://community.cisco.com/t5/network-security/how-do-i-open-a-range-of-ports-on-a-pix/m-p/1724893#M562808 <HTML><HEAD></HEAD><BODY><P>I am not sure about it, but I guess we do not have the range option in the ACL to open a range of ports, we might have to upgrade the PIX firewall.</P><P></P><P>Thanks,</P><P>Varun</P></BODY></HTML> Mon, 09 May 2011 19:32:05 GMT https://community.cisco.com/t5/network-security/how-do-i-open-a-range-of-ports-on-a-pix/m-p/1724893#M562808 varrao 2011-05-09T19:32:05Z Re: How do I open a range of ports on a Pix? https://community.cisco.com/t5/network-security/how-do-i-open-a-range-of-ports-on-a-pix/m-p/1724894#M562810 <HTML><HEAD></HEAD><BODY><P>Hi there,</P><P></P><P>As far as I know there isn't a range command for ports, however you can use the object-group facility in the pix.</P><P></P><P>This document may help explain a bit better.</P><P></P><P><A href="http://www.cisco.com/en/US/partner/docs/security/pix/pix63/command/reference/mr.html#wpxref59427">http://www.cisco.com/en/US/partner/docs/security/pix/pix63/command/reference/mr.html#wpxref59427</A></P><P></P><P>Good luck!</P><P></P><P>Brad</P></BODY></HTML> Tue, 10 May 2011 06:35:54 GMT https://community.cisco.com/t5/network-security/how-do-i-open-a-range-of-ports-on-a-pix/m-p/1724894#M562810 bmcginn 2011-05-10T06:35:54Z