topic IDSM-2 Block Connections in Network Security https://community.cisco.com/t5/network-security/idsm-2-block-connections/m-p/1764948#M56346 <HTML><HEAD></HEAD><BODY><P>Here we go </P><P></P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_example09186a00801c0e3c.shtml#t5">http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_example09186a00801c0e3c.shtml#t5</A></P><P></P><P>Basically just need to:</P><P></P><UL><LI>Set signature or policy to block host</LI><LI>Enable blocking </LI><LI>Device Login Profile to log on the router, ASA or SwitchL3</LI><LI>Configure de blocking devices</LI><LI>Set the L3 device blocking interface. </LI></UL><P></P><P>Its pretty straight forward just look out on for the pre-acl or pos-acl bloking and it will work just fine.</P><P></P><P>Cya </P></BODY></HTML> Sun, 28 Aug 2011 22:56:57 GMT Rodrigo Gurriti 2011-08-28T22:56:57Z IDSM-2 Block Connections https://community.cisco.com/t5/network-security/idsm-2-block-connections/m-p/1764947#M56345 <P>Can IDSM-2 Block Connections on FWSM vis Shun? If not can it Block on 6500? I have Host Block working on FWSM with no problem but not the connection Blocking.</P><P></P><P>Can someone post some config example of Connection Blocking please.</P><P></P><P>Regards,</P><P></P><P>Sent from Cisco Technical Support iPad App</P> Sun, 10 Mar 2019 12:27:42 GMT https://community.cisco.com/t5/network-security/idsm-2-block-connections/m-p/1764947#M56345 Arafat Bique 2019-03-10T12:27:42Z IDSM-2 Block Connections https://community.cisco.com/t5/network-security/idsm-2-block-connections/m-p/1764948#M56346 <HTML><HEAD></HEAD><BODY><P>Here we go </P><P></P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_example09186a00801c0e3c.shtml#t5">http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_example09186a00801c0e3c.shtml#t5</A></P><P></P><P>Basically just need to:</P><P></P><UL><LI>Set signature or policy to block host</LI><LI>Enable blocking </LI><LI>Device Login Profile to log on the router, ASA or SwitchL3</LI><LI>Configure de blocking devices</LI><LI>Set the L3 device blocking interface. </LI></UL><P></P><P>Its pretty straight forward just look out on for the pre-acl or pos-acl bloking and it will work just fine.</P><P></P><P>Cya </P></BODY></HTML> Sun, 28 Aug 2011 22:56:57 GMT https://community.cisco.com/t5/network-security/idsm-2-block-connections/m-p/1764948#M56346 Rodrigo Gurriti 2011-08-28T22:56:57Z