topic Re: ASA5505 IPS Module - Signature / Engine Update Error in Network Security

ASA5505 IPS Module - Signature / Engine Update Error

cabarrushealth — Sun, 10 Mar 2019 12:26:07 GMT

I have just licenses our IPS Module Sensor and wanted to setup Auto/Cisco.com Update's so it checks once a day. I was able to apply the license via the update button in the Cisco ADSM interface. When the update occurs I receive a "error 19 opening loc device" and the unit goes into bypass mode. I reboot the sensor and it goes out of bypass mode.

Any assistance would be appreciated.

thanks

Re: ASA5505 IPS Module - Signature / Engine Update Error

Dustin Ralich — Fri, 05 Aug 2011 13:17:55 GMT

Hi Kevin. Can you please post a copy of the following two (2) command outputs (from the sensor):

show version
show stat host | begin Auto Update

Re: ASA5505 IPS Module - Signature / Engine Update Error

cabarrushealth — Fri, 05 Aug 2011 20:52:25 GMT

thanks for the reply. it seemed to of fixed itself automatically.

Are there any updates i need to run or does it look like i have the latest engine etc..?

thanks

Re: ASA5505 IPS Module - Signature / Engine Update Error

Dustin Ralich — Mon, 08 Aug 2011 13:20:49 GMT

thanks for the reply. it seemed to of fixed itself

You're welcome. Yes, looks like the last attempt(s) was successful (based on the outputs you provided).

Are there any updates i need to run or does it look like i have the latest engine etc..?

It would generally be advisable to upgrade the software itself (6.2(2)) to the latest release (6.2(4)) for the included defect fixes. Other than that, you are already running the latest Engine (E4) and signature definitions (S587).