asdm access error

mirehteshamali — Mon, 11 Mar 2019 19:56:23 GMT

hi all

i am trying to access asa firewall through asdm in lab (gns3 environment)

ciscoasa(config)# sh ver

Cisco Adaptive Security Appliance Software Version 8.0(2)
Device Manager Version 6.3(5)

ciscoasa(config)# sh run asdm
asdm image disk0:/asdm-635.bin
asdm history enable

ciscoasa(config)# sh run http
http server enable
http 12.0.0.2 255.255.255.255 outside

however i m getting the follwoing log message

%ASA-5-402128: CRYPTO: An attempt to allocate a large memory block failed, size: 100, limit: 0.
%ASA-5-402128: CRYPTO: An attempt to allocate a large memory block failed, size: 96, limit: 0.
%ASA-5-402128: CRYPTO: An attempt to allocate a large memory block failed, size: 140, limit: 0.
%ASA-5-402128: CRYPTO: An attempt to allocate a large memory block failed, size: 1032, limit: 0.
%ASA-5-402128: CRYPTO: An attempt to allocate a large memory block failed, size: 96, limit: 0.
%ASA-5-402128: CRYPTO: An attempt to allocate a large memory block failed, size: 100, limit: 0.
%ASA-5-402128: CRYPTO: An attempt to allocate a large memory block failed, size:

Does any one knows how to overcome this issue ?

Thanks

Re: asdm access error

Federico Coto Fajardo — Thu, 24 Feb 2011 21:20:24 GMT

Hi,

I don't think is a configuration issue on the ASA but a problem with GNS3 specifically, I'm sure you try it on a real device it works.

Perhaps increasing the amount of memory the ASA has on the program might help?

Federico.

topic asdm access error in Network Security

asdm access error

Re: asdm access error