ASA dynamic Access Rules

Patrick Koenighaus — Mon, 11 Mar 2019 19:48:33 GMT

Hello together,

in ower company we are using the Cisco ASA 5520 ASA 8.3.1 ASDM 6.3.1.

Is it possible to make an dynamic access rule?

For Example:

Soure: any

destination 10.x.y.100

wherein the second and third octet are dynamically.

Is it a way to solve this?

Thanks in adavance.

Best Regards

Patrick

Re: ASA dynamic Access Rules

andamani — Fri, 11 Feb 2011 05:09:48 GMT

Hi Patrick,

I undertsand that you want the final octect to be set as 100 and the 2nd and 3rd octect to keep on changing.

If that is the case then i don't think that is possible.

Also the requirement of yours means multiple destination is multiple host but not in the same network or subnetwork. They are all seperate hosts. This is not how VLSM works.

The link below will describe the VLSM:

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00800a67f5.shtml#vlsmexample

Regards,

Anisha

P.S.: Please mark this thread as answered if you feel your query is resolved.

topic ASA dynamic Access Rules in Network Security

ASA dynamic Access Rules

Re: ASA dynamic Access Rules