topic Re: PIX output to Syslog in Network Security

PIX output to Syslog

ddicky — Fri, 21 Feb 2020 07:15:57 GMT

I could'nt get the output from the PIX firewall to my syslog server,below is the part of my show run config.My PC with syslog software running is 192.168.2.2.Pls advise.

PIX Version 6.2(2)

nameif ethernet0 outside security0

nameif ethernet1 inside security100

enable password xxxxx

passwd xxxxx

hostname ciscopix

domain-name cisco.com

fixup protocol ftp 21

fixup protocol http 80

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol ils 389

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol sip 5060

fixup protocol skinny 2000

names

pager lines 24

logging on

logging trap debugging

logging facility 16

logging host inside 192.168.2.2

interface ethernet0 10baset

interface ethernet1 10full

mtu outside 1500

mtu inside 1500

ip address outside 192.168.253.3 255.255.255.0

ip address inside 192.168.2.1 255.255.255.0

ip audit info action alarm

ip audit attack action alarm

pdm history enable

arp timeout 14400

static (inside,outside) 192.168.2.0 192.168.2.0 netmask 255.255.255.0 0 0

route outside 0.0.0.0 0.0.0.0 192.168.253.2 1

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si

p 0:30:00 sip_media 0:02:00

Re: PIX output to Syslog

ciscoacs — Mon, 01 Mar 2004 11:07:35 GMT

i'm not sure but i think you may be missing the logging history command on top of this?

can you do a show log and show what is at the top of your log?

sam

Re: PIX output to Syslog

jmia — Mon, 01 Mar 2004 12:37:12 GMT

Hi,

Try: (in config mode)

logging on

logging timestamp

logging history warnings

logging host inside

Q. What syslog software are you running on the inside client?

Hope this helps / Jay.

Re: PIX output to Syslog

ddicky — Tue, 02 Mar 2004 01:40:37 GMT

Hi below is my show logging,seems like all my output is shown below.I had put in the logging history warning,still the same.

ciscopix# show logging

Syslog logging: enabled

Facility: 16

Timestamp logging:

enabled

Standby logging:

disabled

Console logging:

disabled

Monitor logging:

disabled

Buffer logging: level debugging, 108 messages logged Trap logging: level debugging, 108 messages logged Logging to inside 192.168.2.2

History logging: level warnings, 4 messages logged

446 TCP FINs

302013: Built outbound TCP connection 26 for outside:198.133.219.25/80 (198.133.

219.25/80) to inside:192.168.2.2/1284 (192.168.2.2/1284)

302014: Teardown TCP connection 25 for outside:198.133.219.25/80 to inside:192.1

68.2.2/1283 duration 0:00:03 bytes 1588 TCP FINs

304001: 192.168.2.2 Accessed URL 198.133.219.25:/cdc_content_elements/home_page/

sniffer/sniffLib-100.js

302013: Built outbound TCP connection 27 for outside:198.133.219.25/80 (198.133.

219.25/80) to inside:192.168.2.2/1285 (192.168.2.2/1285)

302013: Built outbound TCP connection 28 for outside:198.133.219.25/80 (198.133.

219.25/80) to inside:192.168.2.2/1286 (192.168.2.2/1286)

Re: PIX output to Syslog

pokwan — Tue, 02 Mar 2004 01:44:42 GMT

I believe it should be

logging trap