topic Re: PIX Load Balancing. in Network Security https://community.cisco.com/t5/network-security/pix-load-balancing/m-p/299163#M568491 <HTML><HEAD></HEAD><BODY><P>No such functionality in the PIX. You could use the router outside the PIX to do the load balancing and NAT for the 2 web servers. Or add a load balancing device in behind the PIX for the 2 servers. But again, no native functionality like this on the PIX.</P><P></P><P>Scott</P></BODY></HTML> Fri, 20 Feb 2004 18:41:28 GMT scoclayton 2004-02-20T18:41:28Z PIX Load Balancing. https://community.cisco.com/t5/network-security/pix-load-balancing/m-p/299162#M568489 <P>Hi.</P><P></P><P>My 2 PIX 515E firewall configured on failover mode, protect 2 server form outside connection.</P><P>Can i load balance or load share with pix the load on the two servers?</P><P>Can i configure PIX like ios routers to balance per session, so the clients randomly access 1st server and 2nd server?</P><P>Thanks.</P> Fri, 21 Feb 2020 07:15:17 GMT https://community.cisco.com/t5/network-security/pix-load-balancing/m-p/299162#M568489 giuliano 2020-02-21T07:15:17Z Re: PIX Load Balancing. https://community.cisco.com/t5/network-security/pix-load-balancing/m-p/299163#M568491 <HTML><HEAD></HEAD><BODY><P>No such functionality in the PIX. You could use the router outside the PIX to do the load balancing and NAT for the 2 web servers. Or add a load balancing device in behind the PIX for the 2 servers. But again, no native functionality like this on the PIX.</P><P></P><P>Scott</P></BODY></HTML> Fri, 20 Feb 2004 18:41:28 GMT https://community.cisco.com/t5/network-security/pix-load-balancing/m-p/299163#M568491 scoclayton 2004-02-20T18:41:28Z