topic PIX EZVPN Phase 1 Problem in Network Security

PIX EZVPN Phase 1 Problem

thethmon — Fri, 21 Feb 2020 07:14:35 GMT

I am having trouble getting past phase 1 with my PIX501 running 6.3(3). Below is the log from the VPN3060 concentrator (4.04a) showing an error. Unfortunately, I cannot find anything on CCO for what this error and associated flags mean.

59586 02/13/2004 10:19:40.500 SEV=7 IKEDBG/65 RPT=165 200.78.65.18

Group [Default]

IKE AM Responder FSM error history (struct &0xfbfb3c8)

<state>, <event>:

AM_DONE, EV_ERROR_CONT

AM_DONE, EV_ERROR

AM_WAIT_MSG3, EV_TIMEOUT

AM_WAIT_MSG3, NullEvent

59591 02/13/2004 10:19:40.500 SEV=9 IKEDBG/0 RPT=4113 200.78.65.18

Group [Default]

IKE SA AM:fa8b7efd terminating:

flags 0x0100c001, refcnt 0, tuncnt 0

Re: PIX EZVPN Phase 1 Problem

rmarchant — Wed, 14 Apr 2004 20:39:18 GMT

I am currently having the same problem. Did you find a resolution, to the Phase 1 negotiation issue with EZVPN.

Re: PIX EZVPN Phase 1 Problem

thethmon — Thu, 15 Apr 2004 12:08:20 GMT

If I remember correctly, I had to re-enter the group/pwd and username/pwd pairs and it worked. For some reason after a reboot, the passwords became corrupted.