ospf cost on vlan interfaces

lcaruso — Mon, 11 Mar 2019 20:04:45 GMT

Hi,

I've been tasked with cleaning up some old client configurations. Several have ospf cost statements, but no ospf process is enabled

interface Vlan1

nameif inside

security-level 100

ip address 192.a.b.c 255.255.255.0

ospf cost 10

interface Vlan2

nameif outside

security-level 0

ip address 12.x.y.z 255.255.255.248

ospf cost 10

All of these configs are talking to one main site with site-to-site-vpn tunnels.

Can I safely remove these ospf statements?

Thanks.

Re: ospf cost on vlan interfaces

Mahesh Gohil — Fri, 11 Mar 2011 01:20:43 GMT

Hi,

Before you clean just make sure that below IP's are not there unders ospf process (via. network command) which will make your ospf down

192.a.b.c

12.x.y.z

regards

mahesh