topic Re: pix 515e in Network Security https://community.cisco.com/t5/network-security/pix-515e/m-p/195326#M588995 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>You should see the 4 other interfaces for the quad card in the 'sh int' output. Nothing other than seating the card is needed. Can you post a 'sh ver'?</P><P></P><P>Scott</P></BODY></HTML> Thu, 02 Oct 2003 12:26:48 GMT scoclayton 2003-10-02T12:26:48Z pix 515e https://community.cisco.com/t5/network-security/pix-515e/m-p/195325#M588994 <P>when i do a sho int i can see my e0 and e1 but i</P><P>cannot see the other four int on my quad card..</P><P>what do i do to see those int to config them?</P><P>thanks.....</P> Fri, 21 Feb 2020 07:01:27 GMT https://community.cisco.com/t5/network-security/pix-515e/m-p/195325#M588994 W-Robinson 2020-02-21T07:01:27Z Re: pix 515e https://community.cisco.com/t5/network-security/pix-515e/m-p/195326#M588995 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>You should see the 4 other interfaces for the quad card in the 'sh int' output. Nothing other than seating the card is needed. Can you post a 'sh ver'?</P><P></P><P>Scott</P></BODY></HTML> Thu, 02 Oct 2003 12:26:48 GMT https://community.cisco.com/t5/network-security/pix-515e/m-p/195326#M588995 scoclayton 2003-10-02T12:26:48Z