need help erasing some lines

jjj092353 — Mon, 11 Mar 2019 20:04:29 GMT

how do I go about erasing the two lines that are bolded from my pix 501 ?

access-list outside_in permit icmp any host 9x.114.187.8
access-list outside_in permit icmp any host 9x.114.187.5
access-list outside_in permit udp any host 9x.114.187.8 eq domain
access-list outside_in permit udp any host 9x.114.187.5 eq domain
access-list outside_in permit udp any host 9x.114.187.5 eq domain
access-list outside permit udp any host 9x.114.187.5 eq domain

if I can't do this - then how ro I go about erasing off of my rules just reloading the rules?

thanks

Re: need help erasing some lines

Federico Coto Fajardo — Thu, 10 Mar 2011 22:00:12 GMT

Hi,

To erase just those two lines you do:

no access-list outside_in permit udp any host 9x.114.187.5 eq domain
no access-list outside permit udp any host 9x.114.187.5 eq domain

You can also remove the entire ACL if needed, but if wanting to remove just those two lines do the above.

Hope it helps.

Federico.

topic Re: need help erasing some lines in Network Security

need help erasing some lines

Re: need help erasing some lines