topic How to permit access corba server through pix according port? in Network Security https://community.cisco.com/t5/network-security/how-to-permit-access-corba-server-through-pix-according-port/m-p/122577#M589963 <P>How to permit access corba server through pix from outside zone according port?</P><P></P><P>We use visibroker which is a type of product of corba.I find that we cann't access corba server which is being inside pix zone from outside zone because I cann't determin the tcp or udp port which corba use.</P> Fri, 21 Feb 2020 06:58:51 GMT gyzhou 2020-02-21T06:58:51Z How to permit access corba server through pix according port? https://community.cisco.com/t5/network-security/how-to-permit-access-corba-server-through-pix-according-port/m-p/122577#M589963 <P>How to permit access corba server through pix from outside zone according port?</P><P></P><P>We use visibroker which is a type of product of corba.I find that we cann't access corba server which is being inside pix zone from outside zone because I cann't determin the tcp or udp port which corba use.</P> Fri, 21 Feb 2020 06:58:51 GMT https://community.cisco.com/t5/network-security/how-to-permit-access-corba-server-through-pix-according-port/m-p/122577#M589963 gyzhou 2020-02-21T06:58:51Z Re: How to permit access corba server through pix according port https://community.cisco.com/t5/network-security/how-to-permit-access-corba-server-through-pix-according-port/m-p/122578#M589991 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Try setting up logging on the pix to a syslog server and take a look at the log messages to see which port(s) is/are being blocked.</P><P></P><P>To setup logging:</P><P>logging host <IPADDRESS syslog="" server=""></IPADDRESS></P><P>logging trap debug</P><P>logging on</P><P></P><P>Kind Regards,</P><P>Tom</P></BODY></HTML> Wed, 10 Sep 2003 11:33:42 GMT https://community.cisco.com/t5/network-security/how-to-permit-access-corba-server-through-pix-according-port/m-p/122578#M589991 tvanginneken 2003-09-10T11:33:42Z