PPPoE - Public IP Range

jill.kane — Mon, 11 Mar 2019 19:57:42 GMT

We have a range of public ip addresses and are using an ASA 5505. The Cisco is already setup as 99.23.119.78 and allows ftp traffic to our internal ftp site at 192.168.1.3. I would now like to be able to setup another ip in our range, 99.23.119.73, to accept http traffic to an internal server. How do I go about doing this?

Here is my current config:

Result of the command: "show running-config"

: Saved
:
ASA Version 8.2(1)
!
hostname ciscoasa
enable password qVQaNBP31RadYDLM encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif ATT
security-level 0
pppoe client vpdn group ATT
ip address pppoe setroute
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
object-group service DM_INLINE_TCP_1 tcp
port-object eq ftp
port-object eq ftp-data
port-object eq www
access-list ATT_access_in extended permit tcp any host 99.23.119.78 object-group DM_INLINE_TCP_1
access-list ATT_access_in extended permit tcp any interface ATT eq ftp
access-list ATT_access_in extended permit tcp any interface ATT eq ftp-data
access-list ATT_access_in extended permit tcp any interface ATT eq www
access-list 100 extended permit tcp any interface ATT eq ftp
access-list 100 extended permit tcp any interface ATT eq ftp-data
access-list 100 extended permit tcp any host 192.168.1.3 eq ftp
access-list 100 extended permit tcp any host 192.168.1.3 eq ftp-data
access-list 100 extended permit tcp any host 192.168.1.3 eq www
access-list extended extended permit tcp any host 192.168.1.3 eq ftp
access-list extended extended permit tcp any host 192.168.1.3 eq ftp-data
access-list extended extended permit tcp any host 192.168.1.3 eq www
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu ATT 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (ATT) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,ATT) tcp interface www 192.168.1.3 9000 netmask 255.255.255.255
static (inside,ATT) tcp 99.23.119.73 www 192.168.1.3 www netmask 255.255.255.255
access-group ATT_access_in in interface ATT
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 ATT
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 ATT
ssh timeout 5
console timeout 0
vpdn group ATT request dialout pppoe
vpdn group ATT localname eossolutions@static.att.net
vpdn group ATT ppp authentication pap
vpdn username eossolutions@static.att.net password ********* store-local
dhcpd auto_config ATT
!
dhcpd address 192.168.1.5-192.168.1.132 inside
dhcpd enable inside
!

threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:7853eba819b95acc0d48be15849ff3e2
: end

Re: PPPoE - Public IP Range

Roman Rodichev — Mon, 28 Feb 2011 03:41:27 GMT

you are missing one command:

access-list ATT_access_in extended permit tcp any host 99.23.119.73 eq www

Re: PPPoE - Public IP Range

lal.antony — Mon, 28 Feb 2011 05:09:32 GMT

@Jill

Please follow below blog article on how to setup your ASA.

http://lalantony.com/?p=46

Cheers

Lal Antony

topic Re: PPPoE - Public IP Range in Network Security

PPPoE - Public IP Range

Re: PPPoE - Public IP Range

Re: PPPoE - Public IP Range