topic PIX Debug in Network Security https://community.cisco.com/t5/network-security/pix-debug/m-p/228168#M591417 <P>When i use debug command on my PIX 515E 6.22, it start to print on console debugging information, this is OK. After a while, it stop showing me messages, and issuing any other debug command cannot resolve this.</P><P>I tried to clear logging and any other form of debug, but nothing.</P><P>Restarting the pix, it show me again debug messages for a while and it stop.</P><P>I think a buffer should be erased but what buffer. Some hints would be appreciated.</P><P></P><P>Thx.</P> Fri, 21 Feb 2020 07:30:03 GMT gcocchi 2020-02-21T07:30:03Z PIX Debug https://community.cisco.com/t5/network-security/pix-debug/m-p/228168#M591417 <P>When i use debug command on my PIX 515E 6.22, it start to print on console debugging information, this is OK. After a while, it stop showing me messages, and issuing any other debug command cannot resolve this.</P><P>I tried to clear logging and any other form of debug, but nothing.</P><P>Restarting the pix, it show me again debug messages for a while and it stop.</P><P>I think a buffer should be erased but what buffer. Some hints would be appreciated.</P><P></P><P>Thx.</P> Fri, 21 Feb 2020 07:30:03 GMT https://community.cisco.com/t5/network-security/pix-debug/m-p/228168#M591417 gcocchi 2020-02-21T07:30:03Z Re: PIX Debug https://community.cisco.com/t5/network-security/pix-debug/m-p/228169#M591421 <HTML><HEAD></HEAD><BODY><P>Try running these commands:</P><P></P><P>no logging monitor</P><P>no logging console</P><P></P><P>It may be that the monitor logging was still in effect.</P></BODY></HTML> Fri, 09 Jul 2004 12:46:05 GMT https://community.cisco.com/t5/network-security/pix-debug/m-p/228169#M591421 ehirsel 2004-07-09T12:46:05Z