topic PIX configuration in Network Security https://community.cisco.com/t5/network-security/pix-configuration/m-p/213766#M593661 <P>I have a problem,Traffic from private subnets is not able to reach internet.The traffic is being nated at PIX.Can anyone check the configuration and let me know where the problem lies.</P><P></P><P> </P><P></P> Fri, 21 Feb 2020 07:18:57 GMT rags123 2020-02-21T07:18:57Z PIX configuration https://community.cisco.com/t5/network-security/pix-configuration/m-p/213766#M593661 <P>I have a problem,Traffic from private subnets is not able to reach internet.The traffic is being nated at PIX.Can anyone check the configuration and let me know where the problem lies.</P><P></P><P> </P><P></P> Fri, 21 Feb 2020 07:18:57 GMT https://community.cisco.com/t5/network-security/pix-configuration/m-p/213766#M593661 rags123 2020-02-21T07:18:57Z Re: PIX configuration https://community.cisco.com/t5/network-security/pix-configuration/m-p/213767#M593666 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Just in case the global pool running out of IP Add please at one IP Address to PAT</P><P>"global (outside) 1 164.164.168.31"</P><P></P><P>clear xlate ---&gt; to clear the previous translation</P><P>clear arp ---&gt; clear the arp cache</P><P></P><P>route inside 192.168.154.0 255.255.255.0 192.168.138.2 ------&gt; what for? it's work?? this is the inside ip right? should not works</P><P></P><P>Sometimes the PIX becomes dumb. So.....restart and wait to c the PIX start build tcp and udp conn. </P><P></P><P>Try to activate to log for the PIX to c what's block the tcp and udp conn.</P></BODY></HTML> Tue, 30 Mar 2004 04:32:20 GMT https://community.cisco.com/t5/network-security/pix-configuration/m-p/213767#M593666 j.hato 2004-03-30T04:32:20Z