topic Re: PIX 501 not responding in Network Security https://community.cisco.com/t5/network-security/pix-501-not-responding/m-p/263511#M594049 <HTML><HEAD></HEAD><BODY><P>Console cable and hyperterm settings work fine on other units. Thanks for the response, calling TAC...</P><P></P><P>Trish</P></BODY></HTML> Mon, 15 Mar 2004 05:28:21 GMT p.kateihwaho 2004-03-15T05:28:21Z PIX 501 not responding https://community.cisco.com/t5/network-security/pix-501-not-responding/m-p/263509#M594047 <P>Hi all, </P><P></P><P>I have a PIX 501 that is not responding. All the Port LED's remain on and it is not passing traffic. I cannot access it via the console or ethernet ports either. Has anybody come across this before?</P><P></P><P>Trish</P> Fri, 21 Feb 2020 07:17:22 GMT https://community.cisco.com/t5/network-security/pix-501-not-responding/m-p/263509#M594047 p.kateihwaho 2020-02-21T07:17:22Z Re: PIX 501 not responding https://community.cisco.com/t5/network-security/pix-501-not-responding/m-p/263510#M594048 <HTML><HEAD></HEAD><BODY><P>If you cannot access the PIX via console, I would call TAC and get it replaced. Is the console cable good? Are you using the correct console settings?</P></BODY></HTML> Fri, 12 Mar 2004 15:04:45 GMT https://community.cisco.com/t5/network-security/pix-501-not-responding/m-p/263510#M594048 doliver 2004-03-12T15:04:45Z Re: PIX 501 not responding https://community.cisco.com/t5/network-security/pix-501-not-responding/m-p/263511#M594049 <HTML><HEAD></HEAD><BODY><P>Console cable and hyperterm settings work fine on other units. Thanks for the response, calling TAC...</P><P></P><P>Trish</P></BODY></HTML> Mon, 15 Mar 2004 05:28:21 GMT https://community.cisco.com/t5/network-security/pix-501-not-responding/m-p/263511#M594049 p.kateihwaho 2004-03-15T05:28:21Z