topic Re: About PIX 520 in Network Security https://community.cisco.com/t5/network-security/about-pix-520/m-p/233764#M594206 <HTML><HEAD></HEAD><BODY><P>520 supports a max of 6 physical interfaces per the command reference for the 6.3 OS. </P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#1075586" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#1075586</A></P></BODY></HTML> Thu, 04 Mar 2004 14:40:23 GMT mostiguy 2004-03-04T14:40:23Z About PIX 520 https://community.cisco.com/t5/network-security/about-pix-520/m-p/233763#M594205 <P>Hi, </P><P></P><P>I&#146;ve got this PIX 520 the show version of which is below&#133; I&#146;m about to </P><P>install the PIX os 6.3, can I also install more interfaces, as per the PIX 6.3 OS I </P><P>should be able to go to 8 10/100 interfaces am I correct. ? Are these the same four </P><P>port and single port interfaces as the current PIX 525 / 515</P><P></P><P>Thanks and Regards</P><P></P><P>-Kevin.</P><P></P><P></P><P>sh ver</P><P>Cisco Secure PIX Firewall Version 5.2(1)</P><P>Compiled on Tue 22-Aug-00 23:35 by bhochuli</P><P>pixfirewall up 277 days 19 hours</P><P>Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz</P><P></P><P>Flash i28F640J5 @ 0x300, 16MB</P><P>BIOS Flash AT29C257 @ 0xfffd8000, 32KB</P><P></P><P></P><P>0: ethernet0: address is 0090.27a3.0d9b, irq 11</P><P>1: ethernet1: address is 0090.27a3.1a52, irq 10</P><P></P><P></P><P>Licensed Features:</P><P>Failover :Enabled</P><P>VPN-DES :Enabled</P><P>VPN-3DES :Disabled</P><P>Maximum Interfaces :6</P><P>Cut-through Proxy :Enabled</P><P>Guards :Enabled</P><P>Websense :Enabled</P><P>Throughput :Unlimited</P><P>ISAKMP peers :Unlimite</P> Fri, 21 Feb 2020 07:16:25 GMT https://community.cisco.com/t5/network-security/about-pix-520/m-p/233763#M594205 kevin 2020-02-21T07:16:25Z Re: About PIX 520 https://community.cisco.com/t5/network-security/about-pix-520/m-p/233764#M594206 <HTML><HEAD></HEAD><BODY><P>520 supports a max of 6 physical interfaces per the command reference for the 6.3 OS. </P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#1075586" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#1075586</A></P></BODY></HTML> Thu, 04 Mar 2004 14:40:23 GMT https://community.cisco.com/t5/network-security/about-pix-520/m-p/233764#M594206 mostiguy 2004-03-04T14:40:23Z Re: About PIX 520 https://community.cisco.com/t5/network-security/about-pix-520/m-p/233765#M594209 <HTML><HEAD></HEAD><BODY><P>Sure, the only thing that would hold you back is if the pix is restricted but this looks to be unrestricted.</P><P></P><P></P></BODY></HTML> Fri, 05 Mar 2004 00:02:11 GMT https://community.cisco.com/t5/network-security/about-pix-520/m-p/233765#M594209 cgregg 2004-03-05T00:02:11Z