topic Static Command not working on PIX 515 in Network Security

Static Command not working on PIX 515

skombathula — Fri, 21 Feb 2020 07:14:58 GMT

Hi,

I have a static command on the PIX 515

static (dmz,outside) 200.200.200.10 192.168.10.10 netmask 255.255.255.255 0 0

when I check using sh xlate it is not translating to the local IP. Following is the output of sh xlate global

Global 200.200.200.10 local 200.200.200.10

I tried to clear the translation table with no effect. This command used to work before the failover of my PIX 515 but after I reset the PIX using failover reset, translation seems to stop functioning.

Any Ideas is this regard would be appreciated

Thanks in advance

kumar

Re: Static Command not working on PIX 515

jackko — Tue, 17 Feb 2004 23:42:06 GMT

what os is running on the pix? 6.3? apparently there is a bug related to nat with 6.3(1) and 6.3(2). if so, you probably need to upgrade the os.

Re: Static Command not working on PIX 515

skombathula — Tue, 17 Feb 2004 23:46:31 GMT

I am running PIX Firewall version 6.2(2)