topic Re: Limit connection per user on FWSM in Network Security

Limit connection per user on FWSM

Joe Montes — Mon, 11 Mar 2019 19:32:42 GMT

Hi there,

I'm trying to configure the FWSM to limit the number of tcp connections per user. I can only find a configuration which limits the entire ip subnet. Is there a similar command or a way to mimick the command on the ASA, "set connection per-client-max"

thanks,

joe

Re: Limit connection per user on FWSM

Jennifer Halim — Mon, 10 Jan 2011 05:40:26 GMT

Hi Joe,

Unfortunately "set connection per-client-max" nor ""set connection per-client-embryonic-max" commands are not supported on FWSM.

Here is the command reference for verison 4.1 FWSM for your reference on "set connection" command:

http://www.cisco.com/en/US/docs/security/fwsm/fwsm41/command/reference/s1.html#wp2734935

Message was edited by: Jennifer Halim

Re: Limit connection per user on FWSM

Joe Montes — Tue, 11 Jan 2011 00:23:20 GMT

Hi Jennifer,

Thanks! BTW I've always been meaning to ask you if you are related or know

of Yennie Halim?

Cheers,

joe

On 10/01/11 4:40 PM, "halijenn"

Re: Limit connection per user on FWSM

Jennifer Halim — Tue, 11 Jan 2011 00:27:04 GMT

Thanks Joe.

Please kindly mark the post as answered and rate useful post if you have no further quesions. Thank you.

PS: No, not related to Yennie Halim (might be my very very distant cousin )