topic Re: PIX 515E with SendMail server inside in Network Security https://community.cisco.com/t5/network-security/pix-515e-with-sendmail-server-inside/m-p/259025#M594752 <HTML><HEAD></HEAD><BODY><P>Could i get any idea of ports/services that needs to be opened in PIX for inbound access for the Sendmail server inside.</P><P></P><P> </P><P></P><P> </P></BODY></HTML> Mon, 09 Feb 2004 09:00:27 GMT NETSOL-CISCO 2004-02-09T09:00:27Z PIX 515E with SendMail server inside https://community.cisco.com/t5/network-security/pix-515e-with-sendmail-server-inside/m-p/259023#M594750 <P>I have a PIX515E with a Linux based sendmail Server sitting in inside LAN. Server has a private IP in the range of 192.9.200.x. I want this to be accessed globally with a public IP of 203.122.23.149.</P><P></P><P> Kindly let me know the what static command in need on PIX and what all ports should be open from outside for the Send Mail access. It should be accessed via web mail from outside.</P><P></P><P></P><P></P><P></P><P></P><P> </P> Fri, 21 Feb 2020 07:14:01 GMT https://community.cisco.com/t5/network-security/pix-515e-with-sendmail-server-inside/m-p/259023#M594750 NETSOL-CISCO 2020-02-21T07:14:01Z Re: PIX 515E with SendMail server inside https://community.cisco.com/t5/network-security/pix-515e-with-sendmail-server-inside/m-p/259024#M594751 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>The following document will get you going...</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/warp/public/707/28.html" target="_blank">http://www.cisco.com/warp/public/707/28.html</A></P><P></P><P>Regards, Jay.</P></BODY></HTML> Mon, 09 Feb 2004 08:25:09 GMT https://community.cisco.com/t5/network-security/pix-515e-with-sendmail-server-inside/m-p/259024#M594751 jmia 2004-02-09T08:25:09Z Re: PIX 515E with SendMail server inside https://community.cisco.com/t5/network-security/pix-515e-with-sendmail-server-inside/m-p/259025#M594752 <HTML><HEAD></HEAD><BODY><P>Could i get any idea of ports/services that needs to be opened in PIX for inbound access for the Sendmail server inside.</P><P></P><P> </P><P></P><P> </P></BODY></HTML> Mon, 09 Feb 2004 09:00:27 GMT https://community.cisco.com/t5/network-security/pix-515e-with-sendmail-server-inside/m-p/259025#M594752 NETSOL-CISCO 2004-02-09T09:00:27Z Re: PIX 515E with SendMail server inside https://community.cisco.com/t5/network-security/pix-515e-with-sendmail-server-inside/m-p/259026#M594753 <HTML><HEAD></HEAD><BODY><P>If the 203.122.23.149 address will only be used for the mail server (i.e. you have a small range of public addresses...like 203.122.23.148-155), then try this:</P><P></P><P>static(inside,outside) 203.122.23.149 192.9.200.x netmask 255.255.255.255</P><P></P><P>access-list 100 permit tcp any host 203.122.23.149 eq smtp</P><P></P><P>access-group 100 in interface outside</P><P></P><P>Hope this helps!</P></BODY></HTML> Mon, 09 Feb 2004 15:00:18 GMT https://community.cisco.com/t5/network-security/pix-515e-with-sendmail-server-inside/m-p/259026#M594753 wares 2004-02-09T15:00:18Z