topic ISP Failover with Cisco PIX in Network Security https://community.cisco.com/t5/network-security/isp-failover-with-cisco-pix/m-p/212177#M595127 <P>Can you do failover to two different ISP's and share the load between the two, or would I require a router with route policy's configured to do this? The Sonicwall 4060 does this, and I was curious if Cisco has a similar way. Thanks!</P> Fri, 21 Feb 2020 07:12:44 GMT jhaggett 2020-02-21T07:12:44Z ISP Failover with Cisco PIX https://community.cisco.com/t5/network-security/isp-failover-with-cisco-pix/m-p/212177#M595127 <P>Can you do failover to two different ISP's and share the load between the two, or would I require a router with route policy's configured to do this? The Sonicwall 4060 does this, and I was curious if Cisco has a similar way. Thanks!</P> Fri, 21 Feb 2020 07:12:44 GMT https://community.cisco.com/t5/network-security/isp-failover-with-cisco-pix/m-p/212177#M595127 jhaggett 2020-02-21T07:12:44Z Re: ISP Failover with Cisco PIX https://community.cisco.com/t5/network-security/isp-failover-with-cisco-pix/m-p/212178#M595131 <HTML><HEAD></HEAD><BODY><P>I would recommend to let the router do the routing part but if you still want to do that on PIX you can only do by running OSPF on the PIX and routers.</P><P></P><P>Thanks</P><P>Nadeem</P></BODY></HTML> Sat, 24 Jan 2004 01:10:55 GMT https://community.cisco.com/t5/network-security/isp-failover-with-cisco-pix/m-p/212178#M595131 nkhawaja 2004-01-24T01:10:55Z