topic Re: ike command issue in Network Security

ike command issue

Jigar Dave — Mon, 11 Mar 2019 19:30:25 GMT

when I do any changes on firewall, I get following error in logs,

it gives me message that below parameters are not updated in firewall

set ike ikev2 initiator-send-dummy-ipsec
set ike ikev2 ike-sa-soft-lifetime
set ike ikev2 stateless-cookie-threshold 100

can anyone help me to remove this from firewall?

I tried to delete ikev2 and reload but no results

Thanks in advance

Jigar

Jennifer Halim — Wed, 05 Jan 2011 05:27:27 GMT

That doesn't sound like a Cisco commands. They seems to be Juniper commands. Are you sure it's Cisco firewall you are getting the errors from?

Please kindly mark the post as answered if it is in fact Juniper firewall instead of Cisco firewall. Thank you.

Jigar Dave — Wed, 05 Jan 2011 06:12:34 GMT

Hi Jeniffer,

yes its juniper command, do you know how to solve this issue?

Jennifer Halim — Wed, 05 Jan 2011 06:15:44 GMT

Not really as this is Cisco forum. Please kindly contact Juniper support for the issue.