topic Re: PDM 3.0(1) on PIx 506e giving problems. in Network Security

PDM 3.0(1) on PIx 506e giving problems.

jimmy — Fri, 21 Feb 2020 07:11:24 GMT

Hi.

I just purchased a Cisco 506e with version 6.3(3) and PDM 3.0(1). I've set up the inside interface as 192.168.1.1 and allowed access to the http server via 192.168.1.0/24. I enter https://192.168.1.1 and https://192.168.1.1/startup.html and try to access the PDM. I install the cerificate and upon username/password, hit enter since i'm at the defaults and none are set up at the moment. IE 6.0 then produces a page full of garbled characters. I've checked to make sure that Javascript and Java are enabled. They are, but no change. I've tried this on 3 Win XP Pro computers. While I'm waiting for my service contract to be associated with my CCO account, I was hoping someone may give me insight into what I'm missing.

thanks.

Re: PDM 3.0(1) on PIx 506e giving problems.

nkhawaja — Sat, 10 Jan 2004 20:07:49 GMT

Try to do the following

from CLI, run "ca zeroize rsa"

then run "setup" and follow the questions. See if that helps.

thanks

Nadeem

Re: PDM 3.0(1) on PIx 506e giving problems.

jimmy — Sat, 10 Jan 2004 20:21:59 GMT

Thanks for your help. This is the second time I tried "ca zeroize rsa" via the console with no luck. It still gives garbled text. I've read through the troubleshooting docs for the PDM and still nothing. Do you think reloading the PDM via tftp will help?

thanks.

Re: PDM 3.0(1) on PIx 506e giving problems.

nkhawaja — Sat, 10 Jan 2004 20:51:27 GMT

Hi,

go ahed and reload the pdm,

Thanks

nadeem