topic pix and vlan in Network Security https://community.cisco.com/t5/network-security/pix-and-vlan/m-p/258364#M595636 <P>hi,</P><P></P><P>I have two questions about pix 501 and logical interfaces (vlan's):</P><P>1. is it possible for a pix 501 to create on the switch interface of the pix two VLAN's 1 for inside lan and 2 for DMZ?</P><P></P><P>If so then I have 2 logical interface</P><P></P><P>2. If it's possible to creat this, can you also do some kind of intervlan routing on the firewall between those logical interfaces? so that packets can be send from one logical interface to the other?</P><P></P><P></P><P>Michiel</P> Fri, 21 Feb 2020 07:11:05 GMT mijff 2020-02-21T07:11:05Z pix and vlan https://community.cisco.com/t5/network-security/pix-and-vlan/m-p/258364#M595636 <P>hi,</P><P></P><P>I have two questions about pix 501 and logical interfaces (vlan's):</P><P>1. is it possible for a pix 501 to create on the switch interface of the pix two VLAN's 1 for inside lan and 2 for DMZ?</P><P></P><P>If so then I have 2 logical interface</P><P></P><P>2. If it's possible to creat this, can you also do some kind of intervlan routing on the firewall between those logical interfaces? so that packets can be send from one logical interface to the other?</P><P></P><P></P><P>Michiel</P> Fri, 21 Feb 2020 07:11:05 GMT https://community.cisco.com/t5/network-security/pix-and-vlan/m-p/258364#M595636 mijff 2020-02-21T07:11:05Z Re: pix and vlan https://community.cisco.com/t5/network-security/pix-and-vlan/m-p/258365#M595638 <HTML><HEAD></HEAD><BODY><P>Hi Michiel,</P><P></P><P>Logical interfaces are not supported on Pix 501 and 506E. 515E is the entry model which supports logical interfaces.</P><P></P><P>Thanks</P><P>Prasad</P></BODY></HTML> Wed, 07 Jan 2004 12:02:45 GMT https://community.cisco.com/t5/network-security/pix-and-vlan/m-p/258365#M595638 prasadrp 2004-01-07T12:02:45Z