topic Re: Site to Site VPN and Mapping Drives in Network Security

Site to Site VPN and Mapping Drives

gmcclana — Mon, 11 Mar 2019 19:28:06 GMT

I have a site to site vpn connection using two Pix devices. When I attempt to map a drive on a PC at the remote site to a Server at the main site it does not work. Also, I can not see the PC's on the network accross the VPN tunnel.

Help!!!

Re: Site to Site VPN and Mapping Drives

manasjai — Tue, 28 Dec 2010 03:05:12 GMT

Hi,

So what I understand is that the tunnel is up but the traffic is not flowing through the tunnel.

If you could attach the sh run from both the PIX.

Also please send the output ofthe following from both the PIX

sh cry isa sa

sh cry ips sa peer x.x.x.x , where x.x.x.x is the peer IP address

Cheers,

Manasi

Re: Site to Site VPN and Mapping Drives

gmcclana — Thu, 30 Dec 2010 18:53:20 GMT

Here are the configs. I can ping accross the tunnel, but that is all at this point.

Thanks!

Re: Site to Site VPN and Mapping Drives

Michael Wollner — Thu, 30 Dec 2010 20:31:27 GMT

Hello,

please try:

sysopt connection tcp-mss 1300

mfg

Michael

Re: Site to Site VPN and Mapping Drives

andamani — Sun, 02 Jan 2011 03:52:55 GMT

Hi,

Are you able to pass traffic still??

If not, please send the following output:

Debug cry condition peer

debug cry ips 127

debug cry isa 127

sh cry ips sa

sh cry isa sa

Regards,

Anisha

Re: Site to Site VPN and Mapping Drives

Jitendriya Athavale — Mon, 03 Jan 2011 04:13:05 GMT

hpw exactly are you trying to access these drives using names or ip addresses

you might also want to look at your wins server ip address and if required point that to an server on the headend

Also when you say u can only ping accross the tunnel, does that mean you cant access any other services like http or any file download or just that you havent tried?