topic Port mapping in Network Security https://community.cisco.com/t5/network-security/port-mapping/m-p/1518384#M599998 <P>Hello guys,</P><P></P><P>I have system which works on Server/Client basis on a specific port number (udp 5000). The Server version of the system is in a remote location where as the client system is installed on more than 1 PC. Our network has a PIX firewall where it has one public address only (eg: 22.22.22.22).</P><P></P><P>Is there anyway I can let all the client systems to connect to the server using the same prot number (UDP 5000) but with single public IP?</P><P></P><P>Rgds</P><P>Nimalraj</P> Mon, 11 Mar 2019 19:00:20 GMT nimalrajphilips 2019-03-11T19:00:20Z Port mapping https://community.cisco.com/t5/network-security/port-mapping/m-p/1518384#M599998 <P>Hello guys,</P><P></P><P>I have system which works on Server/Client basis on a specific port number (udp 5000). The Server version of the system is in a remote location where as the client system is installed on more than 1 PC. Our network has a PIX firewall where it has one public address only (eg: 22.22.22.22).</P><P></P><P>Is there anyway I can let all the client systems to connect to the server using the same prot number (UDP 5000) but with single public IP?</P><P></P><P>Rgds</P><P>Nimalraj</P> Mon, 11 Mar 2019 19:00:20 GMT https://community.cisco.com/t5/network-security/port-mapping/m-p/1518384#M599998 nimalrajphilips 2019-03-11T19:00:20Z Re: Port mapping https://community.cisco.com/t5/network-security/port-mapping/m-p/1518385#M600000 <HTML><HEAD></HEAD><BODY><P>If I'm reading you right, if you don't buy any more IPs then you could use</P><P></P><P>static (inside,outside) tcp interface outside 5000 X.X.X.X 5000</P><P></P><P>so if you sent any traffic to 22.22.22.22 it would go to the server (X.X.X.X)</P></BODY></HTML> Tue, 26 Oct 2010 13:48:52 GMT https://community.cisco.com/t5/network-security/port-mapping/m-p/1518385#M600000 golly_wog 2010-10-26T13:48:52Z